Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - doug

Pages: 1 ... 5 6 [7] 8 9 ... 22
91
Waste Oil Filtering / Re: wmo centrifuge project
« on: January 25, 2014, 12:20:38 pm »


There was a youtube video of a guy mixing acetone with waste motor oil and burning in his pressure system. I think I sent the link to Russ when he was using his pressure system.

92
Waste Oil Filtering / Re: wmo centrifuge project
« on: January 22, 2014, 09:36:17 pm »


What size sucker do you have? I was thinking of using 120 gal tank as a sucker/pressure set up. Sure would like to see some pics of your set up.

doug

93
User Projects & Pictures / Re: I need ideas
« on: December 23, 2013, 08:24:38 pm »
Quote from: dogg478_1902 on December 22, 2013, 12:53:57 pm
I am working on building a big cooker out of a home oil tank laid on it's side with a cement block (possible firebrick lined) fire box with a large waste oil burner. Now what would be the best way to build the burner, I'm thinking I need to take one of the large pressure tanks I have and set it up to hold 10-20 gallons of waste oil and connect it to a compressor. I am not sure how to build the burner itself besides a nozzle and a blower of some kind. I want to be able to heat up 100-200 gallons of product in a reasonable period of time with as big of a burner as I can build or a pair of big burners and be able throttle down to a low boil. So let me hear what your thoughts are and what you think I could do for construction of my burner and pressure vessel.

How many BTU's are you looking at to make your cooker work?

94
Waste Motor Oil / Re: let the fun begin
« on: December 18, 2013, 09:30:39 pm »
Once you get the blast tube off it's easy to get at. The cartridge just pulled out.

Just checked the burner out and it's back doing what it did before. Tomarrow I'll have to find a relay and change that.

95
Metering Pumps / Re: Building a metering pump
« on: December 18, 2013, 08:41:10 pm »
Russ,


 Are you using your pump yet?

96
Waste Motor Oil / Re: let the fun begin
« on: December 18, 2013, 08:39:52 pm »
With over 6000 hours run time on the burner I had some trouble today. When the aquastat would call for heat the digital temp controller came on, but the temp only raised to 120*. Replaced the heat cartridge and now everything is working again. Also got to clean the nozzle while it was down.

97
Waste Motor Oil / Re: CLEAN BURN CB1400
« on: December 11, 2013, 03:56:22 pm »
here's the manual and the troubleshooting on page 10-3 or 10-4 sounds like your issue.

http://www.cleanburn.com/dealers/library/BOOK%20CB_1400.pdf

98
Waste Motor Oil / Re: CLEAN BURN CB1400
« on: December 11, 2013, 03:46:03 pm »
here's a guy testing the transformer.

http://www.youtube.com/watch?v=6qFTRItYGXw

you might try putting your old cad cell back in.

99
Waste Motor Oil / Re: CLEAN BURN CB1400
« on: December 10, 2013, 10:18:07 am »
i was going to suggest cleaning the screen in the suntec pump, but that didn't seem the problem. have you disassembled and cleaned the nozzle or replace the nozzle?

100
Waste Motor Oil / Re: CLEAN BURN CB1400
« on: December 09, 2013, 07:38:01 pm »
you have 40 psi going into the suntec pump?

101
Waste Motor Oil / Re: CLEAN BURN CB1400
« on: December 09, 2013, 09:57:38 am »
Does your clean burn have a typical fuel oil pump on it?

doug

102
Waste Motor Oil / Re: Sanders style/mother earth news heaters
« on: November 26, 2013, 08:02:44 pm »
That's like a quart and a half here in the states. Where are you achieving the 350* C at on your burner?

doug

103
Commercial Waste Oil Heaters / Re: Lanair MX300 problem
« on: November 22, 2013, 07:44:24 pm »
Wow! Sure takes alot to clean one of these.

http://www.youtube.com/watch?v=mbP08l5mBZU

 More videos I found.

http://www.youtube.com/watch?v=YueBCHTNKPg

 http://www.youtube.com/watch?v=i6lJObc9P_A


http://www.youtube.com/watch?v=dx2eTYGHf2c

doug

104
Waste Motor Oil / Sanders style/mother earth news heaters
« on: November 20, 2013, 06:35:50 pm »
 If you have this type heater could you please tell me how much oil it burns in an hour?

doug

105
Commercial Waste Oil Heaters / Re: Lanair MX300 problem
« on: November 17, 2013, 04:34:08 pm »
Jman,


 Welcome to the site. I like a guy that tries to answer his own questions. I'm sorry I have no answer to your questions I'm not familiar with commercial waste oil heaters. Please keep us up to date on your heater.

doug

Pages: 1 ... 5 6 [7] 8 9 ... 22