Waste Oil Heater > Waste Oil Filtering

Whole house water filter

<< < (2/2)

Mschindler300:
25 Micron Ehhh maybe im being a bit excessive when im filting 5 micron before the Holding tank then filtering again inline before the Burner

Cmdr. Ron:
I don't anything excessive about it, Sir.

Have you read Kyles postings regarding Micron Sizes & Particle Filtration?
 - http://wasteoilheaterforum.com/index.php?action=profile;u=20

Depending upon brand, PH8 filters vary between roughly 22 or so & 45 - a mighty big spread.
100 mesh should be about 37 micron.
12 to 20 micron should be easily found, and ensure that oil is clean.

Russ -
Checking the filter details at the NAPA filter cross reference site will quickly show which filters will fit that head and how well they strain the garbage.

Shalom!
Cmdr. Ron

doug:
http://www.filterbag.com/U-S-Mesh-vs-Micron-21.html

Cmdr. Ron:
Thanks, Doug.
I stand corrected. :-[
 - Swapped directions on cypherin' my goez-intas & my timeses with gloves on my feet - doubling, rather than halving mesh size.  Or words to that effect.

doug:
Ron,
I know many times I've forgot what I thought I knew.
Gald to see you adding to the forum and welcome here.
doug

Navigation

[0] Message Index

[*] Previous page