« previous next »
Pages: [1]

Author Topic: Newbie with a question.  (Read 15466 times)

Notime

  • Gettin' the fire started!
  • *
  • Posts: 1
    • View Profile
    • Email
Newbie with a question.
« on: November 29, 2010, 07:06:26 am »
Hello,
           My son and I finished a Roger Sanders style burner over the weekend. It seems to work but I don't get a lot of heat from it yet. I was just wondering what tweaks seem to work to produce more heat. Equipment 40 gal heater tank 4 inch inlet 6 inch outlet 1/4 inch oil feed through a needle valve. My current burner is a small heavy stainless fry pan. Any suggestions will be appreciated.

Thanks
Logged

OILHEAT

  • Gettin' the fire started!
  • *
  • Posts: 9
    • View Profile
    • Daniel Tree Farm
Re: Newbie with a question.
« Reply #1 on: November 29, 2010, 07:20:14 pm »
feed it more oil!! I have had the best burn reducing the 4 inch intake down to roughly two inches by sliding my flat crewd draft control over the opening also.
Logged
Used oil is beautiful

Dead Eye

  • Gettin' the fire started!
  • *
  • Posts: 40
    • View Profile
Re: Newbie with a question.
« Reply #2 on: November 29, 2010, 10:04:14 pm »
 I never ran a sanders heater so take this for what its worth.  In gun systems waste oil like very little draft, all most positive pressure, less than 1/10th water inch and lots of swirl in the combustion air.
Logged
Pages: [1]
« previous next »