Waste Oil Heater Forum - Your definitive source for burning waste oil for heat.

About 3 years ago, I started to try to make a waste oil heater. At first stage I wanted to make a babington burner, but after 2 years of struggling with that I decided to go further with an other plan. So I tried the Rodger Sanders model (the one with the hollow cone) but after building and testing that one, I was not contented with it. Now about 3 weeks ago, I started with a turk burner. I finishend that one in about 3 days. When I tested it, I was very surpriced that it works this good. First testing was igniting it, and feed it by hand, with just een oil can. A few days later I maked a automatic drip feed on it, and let it burn for about 8 hours, and no problems @ all.

Oké now some pics;

The burner tube


The burner chamber;


Gearpump;


Manifold for drip feed;


Homebrew safety valve;


Homebrew power supply;


Set


Heat exchanger;


Oké later I tell you guys more..........if there are allready questions, ask them!

Greats from Holland