Waste Oil Heater Forum - Your definitive source for burning waste oil for heat.

Waste Oil Heater => User Projects & Pictures => Topic started by: techdif on January 09, 2011, 08:38:51 pm

Title: smokey
Post by: techdif on January 09, 2011, 08:38:51 pm

Hopefully I've done everything right and there should be pictures of the inside of the heater inside of door with seal pin/latch for door and the heater with door on.  I'm kinda proud of my door and is attachment.  I thought about hinges and inside frame but this is pretty darn easy and air tight.

Title: Re: smokey
Post by: techdif on January 11, 2011, 01:43:17 pm

Still seem to have too much smoke but at least now she is puttin out some heat.  1/4" ball valve about 1/3 open and $10 revlon hair dryer feeding the top with heat for hair dryer off. After fooling with a bit I got the body cherry all the way around from the bottom up about about 2 feet.  Wish I had photoed that.

Title: Re: smokey
Post by: Russ on January 12, 2011, 11:05:32 pm

Whoah.... now I think I see the problem.  Revlon hair drier??  Didnt you know Vidal Sassoon hair driers are the best?  Haha... j/k!

Title: Re: smokey
Post by: techdif on January 13, 2011, 06:59:04 am

Sassoon probably would but I was looking for cheap.  Think it was about $11 but dang what a difference in out put.

Title: Re: smokey
Post by: techdif on March 23, 2011, 09:30:46 pm

It's been a while since I logged in.  I finally got some paint on smokey but still not installed yet.  Now that it's warm I can install it lol!  But I just want to say you guys are some real artists!  After looking back through some of the other posts I almost regret posting pics of junk!  Love the info and again there is some VERY nice work in here!