So relit this AM seemed better on those Airband settings from the start. After about 5 min it started the smoke backfire again so I shut it down and need am just going to clean it out good. I can't smoke out my shop as I currently work in it. I did take 3 videos and uploaded at the link shared.
I ordered a tune up kit because it still won't start on its own which doesn't make sense. I have everything for ignition and it touches of really fast with the torch. The tune up kit is a nozzle, cathodes, gaskets and etc. I also ordered a new transformer although I'm not convinced mine is bad. The very first time I fired it up it lit right away. Got a carbon bridge and wouldn't relight. Cleaned it off and still nothing. At this point I'm thinking it has to be the ignition.
Oil is heating fine all the way to the gun. Shop has been above 55 all week and weekend.
There are 3 videos. Initial ignition, stack smoke initial, and video of raw fuel igniting and starting the shutter.
Initial ignition
https://imgur.com/gallery/nYsvx0J