Waste Oil Heater > Waste Vegetable Oil
retention head for wvo
liam:
I do not live anymore in the USA. Can someone help me designing a good retention head? around 20-25 kw needed.
liam:
Meaning I'm far away now from USA and shipping is impossible...
liam:
at least some advice please! ???
doug:
I made mine from an old stainless steel microwave. Cut a 2 inch strip long enough to wrap around the blast tube and tack welded it to gather to make a collar. To make the deflector I cut a 4 inch diameter piece. Cut a hole in the center of it to clear the nozzle. Then made cuts from the out side diameter toward the center. Then tack welded the deflector to the collar. I could slide the s/s retention head in and out on the blast tube. When it was were I wanted it I drilled a hole through the collar and blast tube to secure with a screw
.http://wasteoilheaterforum.com/index.php?topic=102.0
Russ:
I'm not much help here. I bought mine from Kagi.
Navigation
[0] Message Index
[#] Next page
Go to full version