Waste Oil Heater Forum - Your definitive source for burning waste oil for heat.
Waste Oil Heater => Welcome Center => Topic started by: Bucky on June 27, 2009, 09:19:39 pm
-
Hi Everyone. This site looks like a great resource. I will be sharing the experiences I had this winter. I built a MEN burner about 8 years ago and brought it out of the moth balls to heat a 30x40 boat shed with 20 ft ceilings. No insulation, only a single layer of white shrink wrap plastic for walls and roof, and a wet dirt/mud floor (frozen most of the time). I was rebuilding a wooden catamaran using a lot of temperature sensitive epoxy. Did I mention I was doing this on the coast of Maine? We had one of the snowiest winters I can remember and it was COLD! It all worked out in the end, but what a learning experience! I look forward to posting my adventures and sharing what I learned with everyone.
Bucky
-
Welcome Bucky.
Sounds like you had some good adventures with your heater. Its a little slow out here during the summer months, but hopefully when the heating season comes there will be some more people out and about here.
Thanks for joining and I look forward to reading more!
Russ