Waste Oil Heater Forum - Your definitive source for burning waste oil for heat.
Waste Oil Heater => Commercial Waste Oil Heaters => Topic started by: cuda70 on November 28, 2013, 07:26:53 am
-
hello all i have a cleanburn 1800 model and i cant adjust the oil pressure it way to high at 10lbs it should be 1.5lbs where should i look for the problem?
-
Welcome cuda70.
Not being familiar with the commercial units, I dont know exactly where to tell you to look, but it must either have an oil pump on it, or an air source for a syphon arrangement, or maybe a combination of both. Can you tell us a little more about the oil pump and or air source. Pump type, is there an air regulator, etc...