Waste Oil Heater Forum - Your definitive source for burning waste oil for heat.
Waste Oil Heater => Commercial Waste Oil Heaters => Topic started by: shmo on December 15, 2010, 05:45:57 pm
-
anybody know anything about these? the guy on at lanair told me i won't be able to get parts. that raises 2 queetions: 1) is it true, or is there another aftermarket seller. and 2) are there parts i will need, meaning are there "disposable " parts or parts that need changing annually..or...
thanks for any help
-
hello,, did you ever find parts for the hot shot 90,, i have one, i need the temp sensor that goes into the block near the nozel,,
-
Anybody have a manual or scanned copy for the Lanair HS90? Just picked one up complete and great shape, but a manual would help with hooking up a couple of disconnected wires.....thanks!
-
If no one has a manual take some pics and we can get it figured out.
-
If it comes to that we will, I'm hoping the manual will surface so I can figure out how the pump is wired in. This thing looks nearly new, although I realize it's probably around 20+ years old. I basically bought it for parts and to mess with, but it's in such good shape that I may end up using it!
-
If anybody else happens across this post, I have a copy of the manual for the HS 90 I can email to anyone that may need it. Not sure if I'm going to go with the Lanair burner, or just use a CK kit that I got complete and working from a burned out house furnace.
-
I have a hs90 oil burner and I could sure use a copy of the manual if you can share it with me
Thank you
G. Huyghe
-
Call this number and ask for Ron. 218-692-6720
-
A big thank you to olscout99 for helping me out with the manual :D